info@australwarm.com
Updated for 2025/2026, our flagship Asutral Warm jacket, the Zero Absolute Evo Dark Down Jacket.
We've added 20% more 850 cuin 90/10 down fill per size, more stretch and roominess for improved mobility, more insulation, breathability and thermal comfort, plus a deeper black with greater contrast.

IMPORTANT: If you are between sizes, choose the larger one for greater comfort on the motorcycle, which is the ultimate goal of our products, in this case, mid-layers.
Our 850 Fill Power Down Jacket90/10has been renewed and improved. It seemed difficult, but we've managed it without sacrificing comfort; on the contrary, we've improved it.
In its development and evolution, we have added a more technical and lightweight outer fabric, increased the down filling by 20% per size, and, thanks to numerous tests, widened the distance between the shoulders and added more elasticity in the armpits to improve the riding experience.
-Relaxed fit
-850 Cuin thermal insulation
-90/10 down fill quality
-20% more fill per size
-DWR (Durable Water Repellent) outer coating for water resistance when used as a street jacket.
-Oeko-Tex Standard 100 certified
-20x20Dn UltraLight polyamide outer fabric, more malleable and breathable, while remaining windproof.
-Elastics and cuffs made of 4-way stretch Polar Winter Power Stretch Lycra
-Reflective detail on the back
-Two external zippered handwarmer pockets, one internal zippered Napoleon pocket, and one mesh pocket for compact down storage
-Head adjustments to prevent body heat loss
-RDS (Responsible Design System) Down Standard Certified)
-BSCI (BSCI Member)
-Bluesign Product

There aren't many differences, and they're mostly not visual; they're more technical, which is what really matters to us. The differences are often imperceptible, and we knew it was difficult to further improve our product, but we've managed to do so while maintaining the same price.
- Higher down density, more fill per size, same 850 cuin thermal insulation power, same 90/10 down quality.
- Small upper rear reflector for use as a street jacket.
- New, more technical inner and outer fabric, TexTrem UltraLight 20x20Dn with DWR treatment.
- More elasticity and more room in the shoulders and back for improved ergonomics on the motorcycle.
Jacket weight in size L: 360g.

The Zero Absolute Evo Jacket is the most advanced product in terms of motorcyclist thermal protection that we could create.
-Extra comfort on a motorcycle, our Down Jacket (2nd Layer) is designed and developed for motorcycle use.
-Versatility, it can be used for motorcycles, street riding or outdoors thanks to its construction and DWR treatment.
-Maximum Thermal Insulation for Motorcycles, its extended 850-fill-power insulation in a 90/10 ratio, and its technical outer and inner layers with water-repellent and Windstopper treatment, make our jacket the best option for extreme insulation from the outside. With it, we can trap body heat, prevent loss, and achieve maximum thermal comfort in the worst conditions.
-Lightweight, our down jacket weighs just over 350g in size L.
-Freedom of movement, thanks to its elastic bands made of Winter Power Stretch fleece incorporated in the lower and back of the armpit, plus extra fabric in the upper back, greatly helping you to be comfortable in the motorcycle position, without compromising its comfort for street use.
At Arc'Warm, we understand that for motorcycle use, and as a mid-layer (2nd Layer), it must be manufactured specifically for that purpose, since it is not an outer layer, although it can be used as one.
This is important information to ensure it can be worn comfortably under any Cordura jacket, as not just any down jacket will fit well under your Cordura gear. It can become uncomfortable, not breathable enough, and restrict movement, achieving the exact opposite of what we at Arc'Warm strive for with all our products: "Freedom of Movement" and "Thermal Comfort".
We maintain the straight cut to guarantee maximum comfort and thermal insulation. In our Zero Absolute Evo Jacket, we have incorporated the best materials and the necessary expertise to create what we believe is the best mid-layer designed for motorcycling. You can also use it as a street or outdoor jacket, withstanding temperatures down to -20°C with confidence (always with appropriate gear).
These types of jackets, known by various names, including 2nd Layer, Mid Layer, Intermediate Layer, etc., must meet certain standards and specifications for motorcycling and fulfill their function, such as:
-The mid-layer for motorcycling should be light and comfortable; our Zero Absolute EVO Jacket has an extra light weight of only 350g in size L.
-A Mid Layer for motorcycling must insulate you from the cold, retain and trap your body heat to provide a layer of warm air around your body. It's also essential, and this shouldn't be forgotten, that a second layer must be breathable. For this reason, we've incorporated the best 90% down/10% feather ratio, and the fill power and insulation are of premium quality: 850 fill power with 175 g/m², right on the limit without exceeding the point where it would no longer be comfortable to wear under a Cordura jacket.
-The 2nd Layer for motorcycling shouldn't make you sweat if the temperature rises; it should help you regulate your body temperature with optimal breathability and wick away excess moisture. Our Zero Absolute, thanks to its high-quality padding and ultra-lite outer Cordura fabric, provides optimal breathability to expel excess moisture.
-The Mid Layer shouldn't restrict your movement and should facilitate usage on the motorcycle, therefore, we have incorporated UltraLight 20x20 Cordura on the outer layer, which is extremely malleable, in addition to including elastic zones to facilitate natural movement on the motorcycle and aid breathability.
A standard down jacket, designed for everyday wear or outdoor use, doesn't offer the breathability and freedom of movement that our Zero Absolute Evo guarantees. Furthermore, they typically have hoods that make them even more uncomfortable and lack elastic panels like ours, which are located underneath and at the back of the armpit to facilitate riding on a motorcycle.
-However, the Second Layer, for independent use on the street as a casual jacket, must be windproof, durable, and water-repellent to be suitable for any situation. The Cordura Ultra Lite perfectly fulfills this requirement thanks to its DWR water-repellent treatment and wind resistance, but for outdoor activities, there are better options on the market, although the Zero Absolute Evo also performs adequately, but without reaching the comfort of the specialists in that sector.
-A Mid Layer should close completely upon itself and fit snugly in all areas where body heat is lost, both in the sleeves and at the bottom. It is designed to fit snugly and prevent body heat loss, along with a closed but not constricting collar.

Although not 100% necessary for motorcycle use, a desirable extra is that when stored on a motorcycle trip where space is always limited, it takes up minimal space. Our jacket is extremely malleable and compressible. It has an internal breathable mesh pocket, which, in addition to being able to hold motorcycle gloves or a neck warmer, can be compressed for storage, facilitating perspiration and the expulsion of odors and moisture. If it is stored in something very enclosed, like a pocket, we will encourage the growth of bacteria and unpleasant smells.
With all these premises, requests, and some more that we're sure we've forgotten to mention but that we took into account to the fullest in the development and evolution of the Zero Absolute Evo, we decided to make the best second layer for motorcycles on the market that we could make, our Arc'Warm Zero Absolute Evo Jacket.
Our recommendation is to combine the 3-Layer system, which you can see by clicking HERE, for perfect protection against the cold while motorcycling. We can also help you equip yourself with the first two layers.
As a base layer, we offer three options that combine perfectly with our Zero Absolute Evo 2nd Layer. One option is our Arctic Evo T-shirt:
Arctic Evo MerinoWool T-shirt, 290g
The other option, for more extreme climates or to guarantee extra thermal comfort, is our Extreme T-Shirt, made with up to 380g/m² of Merino Wool, our Zero Absolute T-shirt, the best thermal T-shirt on the market, designed and tested in the most extreme climates.
Zero Absolute Merino Wool T-Shirt 380g/m²
The last option, for those who don't have a good Cordura outer jacket or simply want extra wind protection, is our t-shirt with a 290g/m² Merino Wool Windstopper layer + a separate Windstopper front layer, the only one on the market that combines these two fabrics.
ArcticStorm Evo MerinoWool 290g/m² T-shirt + Windstopper
We have chosen the highest quality 90/10 down with an 850 fill power rating for the filling, and to arrive at this, during the conceptualization and development process, we had to answer all these questions.
What does fill power mean in a down jacket? What does 90/10 mean? Why down and not a synthetic fiber? We invite you to invest a few minutes of your time in exploring all these questions and much more, so you can learn what you need in your fight against the cold and for regulating your body temperature:
EVERYTHING YOU NEED TO KNOW ABOUT DOWN FOR MOTORCYCLING (FOR YOU MOTORCYCLISTS)

If you have read the necessary information about down jackets for use on motorcycles, we can continue with the description of our Zero Absolute Evo.
Furthermore, although not all down jackets have a hood, they generally do, which we consider unnecessary for motorcycling. Therefore, we have eliminated the down-filled hood, which would only cause discomfort with the neck of the motorcycle jacket and helmet, significantly impacting passive safety. We have also opted not to include a waterproof inner hood to avoid increasing the product's cost. If it really rains, we recommend other specific products, such as a balaclava with a water-repellent or windproof-like lower front or perimeter layer. If a hood is used with the second-layer jacket, the following will occur: water will run down the bottom of the helmet and directly onto the inside and outside of the down jacket, creating a very uncomfortable feeling of dampness. The best thing to do when the rain is heavy is to zip up your outer jacket as much as possible, as it's responsible for keeping out the water, and let the helmet and outer jacket combination do their job. If you still can't get comfortable, and your jacket has a storm collar, you'll have a high degree of waterproofing, since any water running down your helmet will go to the storm collar and from there to the outside of your jacket. As we said, if your mid-layer has a hood, all you'll achieve is trapping water between your outer and inner layers—a very bad idea.

The outer fabric is made of UltraLight TexTreme 20x20 Dn Cordura Polyamide, which is extremely lightweight, malleable, breathable, durable, windproof, and coated with a DWR treatment to ensure the fabric is water-repellent.
As an added bonus, we've included an increased elastic zone in our Zero Absolute Evo on the back of both sleeves and around the underarm area to facilitate the rider's natural movement while riding. The material is, of course, the best for preventing body heat loss and ensuring excellent breathability: Polar Winter Power Stretch Lycra, approved for use at temperatures below -10°C.

The sleeves are made of the same material to prevent body heat loss in that area.

It also has adjustments to completely close the bottom, thus minimizing body heat loss.

In addition to everything mentioned above, it has two warm outer pockets with zippers, one inner zippered pocket, and a mesh pocket where you can compactly store the entire jacket so it takes up minimal space when traveling, in your suitcase, or when not in use. You can also use it to store gloves, a neck warmer, or anything else you like.
